Virtual Serial Port Kit 54 Full

Serial over Ethernet Connector is one of the leading solutions in the market of serial over IP software. The program has been developed by Electronic Team for sharing RS232, RS422, and RS485 ports over TCP/IP or UDP channels. This utility supports serial over Ethernet protocol, which allows redirecting real and virtual COM interfaces over local networks.

The next solution is able to share virtual serial ports over Ethernet as well. It is called TCP-Com. TCP-Com is a simple app that can convert RS232 serial data to TCP/IP data and vice versa. This app will be a big help for those who want to communicate with serial devices via TCP/IP port connections.

Virtual Serial Port Kit 54 Full

Download Zip

Advanced Virtual COM Port is a useful utility for serial communications across the network. The app offers powerful features to create virtual COM ports and share real ones for remote access. This serial to Ethernet software helps to establish connections via a virtual null-modem cable locally or through a TCP/IP network.

SerialToIP is a Terminal server software which allows you to establish a connection with a device attached to a serial port over LAN or the Internet using well-supported TCP socket communications. This project is designed as a free solution. The working code it offers is plain and clear to understand.

HelpWire saves technical support teams time and money by enabling remote connectivity to client computers and USB devices from a centralized location. It uses advanced port virtualization to enable full control of devices connected to network-attached serial ports.

A direct TCP or UDP connection can be created between two Tibbo Device Servers. Thanks to this outstanding feature you can create a virtual connection through serial channels within a single room, a building and even globally.

HW VSP is a dedicated serial over IP software driver used for providing an operating system with virtual serial interfaces. This solution can easily forward any data from a virtual COM port to a hardware serial port over IP. A user just needs to specify the IP address and port number in the software settings. HW VSP is able to run as an NT service suitable for servers.

The problems that can be solved using Serial Servers can be divided into local and network ones. The first type covers issues related to connecting a certain device via a serial interface to a workstation not equipped with a COM port. The second type can be described as sharing serial interfaces or COM-based equipment over Ethernet network.

Hardware Serial to Ethernet converters is a wide class of devices which are included in the product range of many manufacturers of communication equipment. These solutions can be called RS485 to Ethernet adapters, consoles, or device servers and can fit a different number of serial ports depending on the model.

NetPort by L-com is a 1-port serial server. NetPort is capable of sharing any serial device over the TCP/IP network. The solution offers a built-in web server which allows any device to which it is connected to be assessed and monitored via a standard Internet browser. This converter easily connects RS232 interfaces and serial-based equipment to the Ethernet IP network

The Arduino Mega 2560 is a microcontroller board based on the ATmega2560. It has 54 digital input/output pins (of which 15 can be used as PWM outputs), 16 analog inputs, 4 UARTs (hardware serial ports), a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started. The Mega 2560 board is compatible with most shields designed for the Uno and the former boards Duemilanove or Diecimila.

The Mega 2560 board has a number of facilities for communicating with a computer, another board, or other microcontrollers. The ATmega2560 provides four hardware UARTs for TTL (5V) serial communication. An ATmega16U2 (ATmega 8U2 on the revision 1 and revision 2 boards) on the board channels one of these over USB and provides a virtual com port to software on the computer (Windows machines will need a .inf file, but OSX and Linux machines will recognize the board as a COM port automatically. The Arduino Software (IDE) includes a serial monitor which allows simple textual data to be sent to and from the board. The RX and TX LEDs on the board will flash when data is being transmitted via the ATmega8U2/ATmega16U2 chip and USB connection to the computer (but not for serial communication on pins 0 and 1).

The Mega 2560 is designed to be compatible with most shields designed for the Uno and the older Diecimila or Duemilanove Arduino boards. Digital pins 0 to 13 (and the adjacent AREF and GND pins), analog inputs 0 to 5, the power header, and ICSP header are all in equivalent locations. Furthermore, the main UART (serial port) is located on the same pins (0 and 1), as are external interrupts 0 and 1 (pins 2 and 3 respectively). SPI is available through the ICSP header on both the Mega 2560 and Duemilanove / Diecimila boards. Please note that I2C is not located on the same pins on the Mega 2560 board (20 and 21) as the Duemilanove / Diecimila boards (analog inputs 4 and 5).

The serial port is mostly useful for two reasons: if you want to debug your firmware printing messages (not strictly necessary with the ARM architecture, since we can also use ARM semihosting) or if you want to exchange commands and messages between your Nucleo board and your PC (perhaps, using a dedicated application you are building).

In this post I'll show you how to properly configure and use the integrated virtual COM port of STM32 Nucleo board. But, before we start coding, it could be really useful take a look to the hardware. ST provides the full hardware project of the STM32 Nucleo (the board is designed using the Altium Designer CAD, a professional CAD used in the electronics industry, but you are not required to have a so expensive piece of software to use your Nucleo). I'll assume the Nucleo-F401RE model, but it should be really easy to rearrange instructions to properly use your specific Nucleo.

Hi Marius,I agree with you: Eclipse can transform every programmer in a serial killer, especially if you have a non so recent PC. I've also successfully setup a complete working toolchain based on a Makefile and a simple text editor like VIM. I'll spend two words about this soon.

Hi Carmine,Its a great tutorial I must say. But do you have a an example to interact with the STM32 Nucleo over serial port.I am trying it out using the Serial APIS on windows and can get the data on the STM32 Nucleo (with few glitches).Just wondering if you have a working - clean example for the same.Eager to hear from your side.!Rgds,Rp

Hi Carmine,OK , I followed the instructions from your book and able to create the Eclipse Environment. I am able to build and flash the hello-nucleo image and see the LED in action.Just wondering is it that simple to use the projects you have uploaded on git.I tried with CH8 chapter for f401re to test the serial port application. But I am getting this error :

Hi Carmine,First I would like to say that your book has been very helpful! Definitely worth the $20. But when I got to chapter 8 and couldn't get the serial communication to work. I used the code from this tutorial (not the one in the book) and compiled it successfully, opened ckermit (I'm using Ubuntu), and realized my device is not showing up in the dev folder shown here: I tried "set line stlinkv2_5" and "set line /dev/tty" in ckermit and neither one worked. Any help would be great!

I am using USART2 as serial port with interrupt based. I enable NVIC in stmcubemx, its generated code whenever data is transferred from terminal interrupt is coming but uart state is HAL_UART_STATE_READY. Because of that its going to receive function UART_Receive_IT function and came out. Please help solve this issue and also I need guidance how to make uart as a interrupt mode. 2ff7e9595c